[A*UG] PRI and line sharing

[Mark Barry]

Yes VersiPack. As I said, sometimes called an Integrated T setup. I believe
that this is the one that can dynamically allocate the bandwidth between the
data and PRI.
You should just need a single span PRI card.
Mark

On Wed, Jul 29, 2009 at 11:38 AM, Jim Freeze <asterisk at freeze.org> wrote:

> On Wed, Jul 29, 2009 at 11:30 AM, Brett Nemeroff<brett-aaug at nemeroff.com>
> wrote:
> > Integrated T products are not frequently used with PRI, but certainly can
> > be. You'll need to find out if you have a PRI product or a T1 product.
> The
> > way inbound calls are handled is very different between the two.
> > I should be pretty obvious in your zaptel.conf and zapta.conf what you
> are
> > using..
>
> The product offerings from TWT, as I understand them, are:
>
> Channel 12
> VersiPack
> Fully Dynamic (legacy Expedius product)
>
> The Channel-12 is phone only and requires a PRI. They can 'pull out'
> any of those lines to analog.
>
> The VersiPack combines data and digital phones. Also requires a PRI to
> access the phones. Analog lines are usually not pulled out of this,
> but brought in through extra lines.
>
> The Fully Dynamic is similar to VersiPack, but more efficiently uses
> BW of the T1 and is cheaper.
>
> --
> Jim Freeze
> _______________________________________________
> Austin-Asterisk-Users-Group mailing list
> Austin-Asterisk-Users-Group at bybent.com
> http://bybent.com/mailman/listinfo/austin-asterisk-users-group
> AAUG Web Site: http://aaug.bybent.com/
>



-- 
Mark Barry
Exabar Phone Systems
512-258-2175
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.bybent.com/pipermail/austin-asterisk-users-group/attachments/20090729/f9741aa3/attachment.htm