[A*UG] a2billing strangeness

[Mark Barry]

In the file sip_general_custom.conf add the following
dtmfmode=auto
relaxdtmf=yes

On Sat, May 29, 2010 at 12:01 AM, rick whitley <rw at rickwhitley.com> wrote:

> I had added the nat, externip, and localnet parameters to each of the
> devices in the sip.conf file and was still sending the internal ip to
> the provider. I then added the params to the sip_nat.conf file which is
> included into sip.conf and it all seems to be working again. :)
>
> The call works great from a land line, but when i dial from a cell phone
> i get random numbers of the pin repeated. if i entered 1234 as a pin the
> console would show 122344 or 1112234 or 11222233444. any thoughts as to
> what would cause this?
>
> thanks
> rw
>
>
> On Fri, 2010-05-28 at 21:54 -0500, rick whitley wrote:
> > After talking with the provider we discovered that they were receiving
> > my internal ip address instead of the external one. I added the nat=yes
> > and expernip=xxx.xxx.xxx.xxx parameters to each device in the sip.conf
> > file. It worked for one evening, now the provider is getting just the
> > internal address again. Is there anywhere else i need to add this
> > information?
> >
> > thanks
> >
> >
> >
> > On Mon, 2010-05-24 at 23:32 -0500, Brett Nemeroff wrote:
> > > Well for starters, lets see your sip.conf for the relevant peer.. be
> > > sure to obfuscate any sensitive data :)
> > > -Brett
> > >
> > >
> > > On Mon, May 24, 2010 at 11:31 PM, rick whitley <rw at rickwhitley.com>
> > > wrote:
> > >         Thanks for the replys and suggestions. I tried all three modes
> > >         but got
> > >         the same results each time. What would be helpful for you to
> > >         see? I am
> > >         using bandwidth.com as my sip provider.
> > >
> > >         thanks
> > >         rw
> > >
> > >
> > >         On Mon, 2010-05-24 at 15:48 -0500, Brett Nemeroff wrote:
> > >         > Rick,
> > >         > This is definitely a dtmfmode issue as Gil pointed out.
> > >         >
> > >         >
> > >         > Try using "auto" for a DTMF mode and see if that helps. If
> > >         not, there
> > >         > are a number of "known" incompatibilities with certain
> > >         vendors (Sonus
> > >         > for example) with G711 and RFC2833.
> > >         >
> > >         >
> > >         > For me, the most reliable has been:
> > >         >
> > >         >
> > >         > Codec=G711 / DTMFmode=inband
> > >         > Codec=G729 / DTMFmode=RFC2833
> > >         > Codec=mixed / DTMFmode=auto
> > >         >
> > >         >
> > >
> > >
> >
>
> --
> "Worship is a journey with God as the goal."
> rw
> rom.5:8
> www.rickwhitley.com
> www.daysjourney.org
>
> _______________________________________________
> Austin-Asterisk-Users-Group mailing list
> Austin-Asterisk-Users-Group at bybent.com
> http://bybent.com/mailman/listinfo/austin-asterisk-users-group
> AAUG Web Site: http://aaug.bybent.com/
>



-- 
Mark Barry
Exabar Phone Systems
512-258-2175
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.bybent.com/pipermail/austin-asterisk-users-group/attachments/20100529/eda4fd41/attachment.htm